Difference between revisions of "Evk-dg-1206"

From DATAGNSS Wiki
Jump to navigation Jump to search
 
(9 intermediate revisions by the same user not shown)
Line 1: Line 1:
'''EVK-DG-1206'''
'''EVK-DG-1206'''


EVK-DG-1206 supports allystar TAU1302/TAU1308/TAU1312/TAU1201/GEM1111/GEM1205.
This EVK is used to evaluate and test the performance and functionality of TAU/GEM series related modules and chips.<br>
It supports USB interface for data transmission and power supply, and can also output data through some interfaces.<br>
It supports allystar TAU1302/TAU1308/TAU1312/TAU1201/GEM1111/GEM1205.
 
[[File:EVK-PRO-1.png|frameless|300px]]
 
=== Quick guide ===
 
1. Connect USB port to PC/Host
 
[[File:evk-dg-1206-main-1.jpg|frameless|300px]]
 
The PC can provide power to the EVK through this USB interface (maximum power supply current 500mA@5V).
 
The USB-to-TTL chip on evk will create a virtual serial port interface on the PC.<br>
If you are using the EVK for the first time, you may need to install the driver.<br>
You can download the driver through this link.
 
2. Connect Antenna to SMA connector
 
GEM1111/GEM1205 can be tested directly using the built-in antenna, without the need for this step.
 
'''SMA connector is SMA-J.'''
 
2. Open Satrack in PC




[[File:evk-dg-1206-main.jpg|thumb|300px]]
[[File:evk-dg-1206-main.jpg|thumb|300px]]

Latest revision as of 13:50, 27 September 2023

EVK-DG-1206

This EVK is used to evaluate and test the performance and functionality of TAU/GEM series related modules and chips.
It supports USB interface for data transmission and power supply, and can also output data through some interfaces.
It supports allystar TAU1302/TAU1308/TAU1312/TAU1201/GEM1111/GEM1205.

File:EVK-PRO-1.png

Quick guide

1. Connect USB port to PC/Host

Evk-dg-1206-main-1.jpg

The PC can provide power to the EVK through this USB interface (maximum power supply current 500mA@5V).

The USB-to-TTL chip on evk will create a virtual serial port interface on the PC.
If you are using the EVK for the first time, you may need to install the driver.
You can download the driver through this link.

2. Connect Antenna to SMA connector

GEM1111/GEM1205 can be tested directly using the built-in antenna, without the need for this step.

SMA connector is SMA-J.

2. Open Satrack in PC


Evk-dg-1206-main.jpg