Difference between revisions of "Evk-dg-1206"
| Line 10: | Line 10: | ||
[[File:evk-dg-1206-main-1.jpg|frameless|300px]] | [[File:evk-dg-1206-main-1.jpg|frameless|300px]] | ||
The PC can provide power to the EVK through this USB interface (maximum power supply current 500mA@5V). | |||
The USB-to-TTL chip on evk will create a virtual serial port interface on the PC.<br> | |||
If you are using the EVK for the first time, you may need to install the driver.<br> | |||
You can download the driver through this link. | |||
2. Connect Antenna to SMA connector | 2. Connect Antenna to SMA connector | ||
Revision as of 13:46, 27 September 2023
EVK-DG-1206
This EVK is used to evaluate and test the performance and functionality of TAU/GEM series related modules and chips.
It supports USB interface for data transmission and power supply, and can also output data through some interfaces.
It supports allystar TAU1302/TAU1308/TAU1312/TAU1201/GEM1111/GEM1205.
Quick guide
1. Connect USB port to PC/Host
The PC can provide power to the EVK through this USB interface (maximum power supply current 500mA@5V).
The USB-to-TTL chip on evk will create a virtual serial port interface on the PC.
If you are using the EVK for the first time, you may need to install the driver.
You can download the driver through this link.
2. Connect Antenna to SMA connector
GEM1111/GEM1205 can be tested directly using the built-in antenna, without the need for this step.
SMA connector is SMA-J.
2. Open Satrack in PC
