Difference between revisions of "DM1103"

From DATAGNSS Wiki
Jump to navigation Jump to search
Line 1: Line 1:
== 1. SYSTEM OVERVIEW ==
== 1. SYSTEM OVERVIEW ==
 
__NOTOC__
=== 1.1 General Description ===
=== 1.1 General Description ===



Revision as of 17:48, 29 May 2024

1. SYSTEM OVERVIEW

1.1 General Description

DM1103 is a high-performance mini PCIe-form GNSS module based on Allystar TAU1103 which is with the state-of-the-art Allystar Cynosure III Lite architecture. It has a Full-Mini size and Half-mini size. It supports global civil navigation systems, including GPS, BDS, GLONASS, Galileo, and QZSS. Featured with SAW and LNA, it achieves high positioning accuracy and short TTFF, especially in a harsh urban environment. The standard mini PCIe interface makes these modules easy to integrate into the laptop, industrial PC, and other applications.

DM1103

1.2 Features

Supports GPS, BDS, Galileo, GLONASS, and QZSS systems Built-in LNA & SAW for better sensitivity Supports A-GNSS Supports geo-fence function Ultra-low power consumption around 13mA in tracking mode Supports antenna supervision

P/N Option GPS/QZSS BDS GLONASS Galileo
L1 C/A B1I L1 E1
DM1103-P0 Full-mini PCIe -
DM1103-P1 Half-mini PCIe -

1.3 Block diagram

DM1103 block diagram

1.4 Specifications

Parameters Specification
GNSS tracking channels 72 channels
GPS/QZSS: L1C/A
Galileo: E1
GLONASS: L1OF
Updating rate 1 Hz (Default), up to 5 Hz
Position accuracy GNSS < 1.5 m CEP @ Open Sky
Velocity & Time accuracy GNSS 0.1 m/s CEP
1PPS 20ns [1]
Time to First Fix(TTFF) Hot start 1 s
Cold start 28 s
Sensitivity Cold start -149 dBm
Reacquisition -159 dBm
Tracking -163 dBm
Power supply VDD 2.0-3.63 V, Typical 3.3 V
Power consumption Operating mode Acquisition 15mA @3.3V
Tracking 13mA @3.3V
Standby mode 10uA
Interface USB
PPS signal accuracy Typical ±1ms for PPS through USB [1]
Protocol NMEA 0183 Protocol Ver.3.01/4.00 (Default)/4.10
Operating limit Velocity 515 m/s
Altitude 18,000 m
Temperature Operating temperature -40०C ~ +85०C
Storage temperature
Certification RoHS & REACH

[1]: get PPS by checking DCD. PPS accuracy is related to USB poll interval.

2 PIN DESCRIPTION

2.1 Detailed Pin Descriptions

Pin# Name Pin# Name
1-3 NC 4 GND
5-8 NC 9 GND
10-14 NC 15 GND
16-17 NC 18 GND
19 NC 20 W_DISABLE#
21 GND 22-25 NC
26-27 GND 28 NC
29 GND 30-33 NC
34-35 GND 36 USB_D-
37 GND 38 USB_D+
39 NC 40 GND
41-42 NC 43 GND
44-49 NC 50 GND
51 NC 52 +3.3Vaux