FAQ

From DATAGNSS Wiki
Revision as of 21:47, 9 May 2024 by Rinex20 (talk | contribs)
Jump to navigation Jump to search

Q: How to get satrack evaluation software?

A: Please download Satrack here.


Q: How to set the output sample rate for the module?

A: Please refer to this article FAQ-how-to-config-output-rate.


Q: How to get the software and hardware version of the module?

A:


Q: How to config the constellations for the module?

A: Not all specifications of modules support constellation configuration, for example, most PVT modules do not support constellation configuration.

The default firmware supports certain combinations, which are determined when the firmware is generated.

For high level modules such as TAU1308/TAU1312/TAU1302, constellation configuration is supported.

It should be noted that not all bands can be configured, as this is subject to the limitations of the module's RF performance.

The following table will illustrate the configuration combinations.

Mode GPS/QZS BDS GLONASS GALILEO NavIC SBAS
L1CA L1C L2C L5 L6 B1I B1C B2I B2b B2a B3I G1 G2 E1 E5a E5b E6 L5 L1
A(default) * (1) - * - * * - - * - * - * * - - (1) *
B * (1) * - - * * * - - - * * * - * - - *
C * * * - - * * - - - - * - * - - - - *

[1] Supported upon request with special firmware

Switching from Option A to Option B requires re-flashing a different firmware version.

Faq-config-constellation.png