TAU951M

From DATAGNSS Wiki
Revision as of 14:02, 20 March 2024 by Rinex20 (talk | contribs)
Jump to navigation Jump to search

TAU951M RTK module

TAU951M, 12*16mm

The TAU951M series has two product models:

  • TAU951M-P2
  • TAU951M-K2

The TAU951M-P2 series is a set of GNSS dual-band high-precision RTK navigation and positioning module which is based on the state of art CYNOSURE IV dual-core SoC chip.
It is capable of tracking all global civil navigation systems (BDS, GPS, GLONASS, Galileo, QZSS, NavIC, and SBAS), as well as BDS-3 signals.
The latest dual-core architecture CYNOSURE IV adopts 22 nm process, with built-in dual-core MCU and 8Mbit MRAM, integrating multi-band multi-system GNSS RF and baseband.
This newly designed architecture makes the module achieve centimeter level position accuracy and higher sensitivity,greater for improved jam resistance and multipath,
and provide a highly robust service in complicated environment.
Along with its preeminent performance, the compact size (16.0×12.2×2.4 mm) of TAU951M-P2 series of LCC package with lower consumption makes it suitable for various demands
under different conditions.
It can be widely used in mower, Intelligent transportation, surveying and mapping, unmanned aerial vehicles (UAVs), intelligent agriculture, and other fields.

Features

  • Concurrent reception of multi-band multi-system satellite signals
  • Tracking 128 GNSS signal channels at the same time
  • Support BDS-3 signals: B1C, B2a
  • Support PPP-B2b/PPP/PPP-RTK (upon request)
  • Internal PVT, RTD, and RTK Engine
  • Update rate up to 10 Hz
  • Support A-GNSS
  • Smart jammer detection and suppression
Mode GPS/QZS BDS GLONASS GALILEO NavIC SBAS
L1CA L1C L2C L5 L6 B1I B1C B2I B2b B2a B3I G1 G2 E1 E5a E5b E6 L5 L1
A(default) * (1) - * - * * - - * - * - * * - - (1) *
B * (1) * - - * * * - - - * * * - * - - *
C * * * - - * * - - - - * - * - - - - *

[1] Supported upon request with special firmware


TAU951M block diagram