Difference between revisions of "Faq-how-to-config-output-rate"

From DATAGNSS Wiki
Jump to navigation Jump to search
Line 17: Line 17:
[[File:rtcm-output-rate.png|400px|frameless]]
[[File:rtcm-output-rate.png|400px|frameless]]


The menu here is primarily for setting the sampling rate. For instance, if the setting in cfg-pwrctl2 is 200ms, that equates to 5Hz.  
The menu here is primarily for setting the sampling rate. For instance, if the setting in cfg-pwrctl2 is 200ms, that equates to 5Hz.
If you set it to 1 here, the output rate would be 5Hz. If you set it to 5, the output rate would then become 1Hz.
If you set it to 1 here, the output rate would be 5Hz. If you set it to 5, the output rate would then become 1Hz.
However, it is generally not recommended to have a sampling rate that is a multiple other than 1. If you desire a 1Hz rate,  
However, it is generally not recommended to have a sampling rate that is a multiple other than 1. If you desire a 1Hz rate,  
it is more advisable to set it to 1Hz directly in cfg-pwrctl2.
it is more advisable to set it to 1Hz directly in cfg-pwrctl2.

Revision as of 12:08, 4 May 2024

How to config output rate

1. open the AS message window

satrack

2. tap to "CFG-PWRCTL2 "

Output-rate-1hz.png

5hz-output-rate.png

3. tap menu "tools" - "set NMEA message" or "set RTCM message"

Nmea-output-rate.png

Rtcm-output-rate.png

The menu here is primarily for setting the sampling rate. For instance, if the setting in cfg-pwrctl2 is 200ms, that equates to 5Hz.

If you set it to 1 here, the output rate would be 5Hz. If you set it to 5, the output rate would then become 1Hz.

However, it is generally not recommended to have a sampling rate that is a multiple other than 1. If you desire a 1Hz rate,

it is more advisable to set it to 1Hz directly in cfg-pwrctl2.